ZappBots wishes a warm welcome to everyone.

Especially our visitors from
Savage///Circuits and Parallax!!!


Please take a look our new forums, we hope you register and become an active user.

The ZappBots forums are being run on phpBB 3.1.4 software which is different then the vBulletin used on the Savage///Circuits and Parallax forums.
Therefore, things look and work a little different, especially creating posts and uploading images / attachments.


The important thing is we have a place toTalk, Learn and Showcase our projects.

Creating some boards, anyone interested??

The place for members to talk about their Projects In Progress
User avatar
jknightandkarr
Member
Member
Posts: 329
Joined: Tue May 12, 2015 5:11 pm
Location: Hopelessly lost on the USS-Titanic 968 years from home....
Contact:

Creating some boards, anyone interested??

Postby jknightandkarr » Wed Nov 24, 2021 3:02 pm

I started a project for myself, but thought that others might find it useful as well, so other designs could come, but here it is:
Image
It's a 10-MOSFET driver board. It features 10- N-Channel IRLZ44N MOSFETs, the Gates are pulled to ground via 10k ohm resistors to prevent any undesired triggers of the MOSFETs, and spots for any 10 resistors of your choosing(or Cap or diode), just connect those to the board, the outputs of your load to Drain or if not needed to the output pins on the resistor terminals, the Gate to your switch or microcontroiler, and connect to ground. There is a ground point on each side to allow easy daisy chaining together or to something else. If needed heat-sinks should be able to be used. 0.4 in between the MOSFETs. Traces are all 20 mils wide minus ground which is 25, but is connected to ground plains on both sides, I picked the IR:Z44N MOSFETs as I saw a video from Great Scott! on YouTube and that is what he used. Thoughts on these are welcome.
Image
My website- Http://titaniceng.altervista.org/

My Facebookhttps://www.facebook.com/TitanicElectronicsGames/

~Owner, Designer & Builder Killer K.A.R.R.
~Starfleet Captain Joe R.
USS-Titanic Registry Number NCC-1513
Launched: Star Date 48509.9 Galaxy Class, Titanic Sub-Class Starship Max Warp: 15.96

User avatar
Granz
Member
Member
Posts: 189
Joined: Sun May 31, 2015 2:37 pm
Location: Pittsburgh, PA, USA, Terra, Sol, Andromeda Arm, Milky Way Galaxy, Milky Way Cluster, Local Universe
Contact:

Re: Creating some boards, anyone interested??

Postby Granz » Wed Nov 24, 2021 9:21 pm

Art G. Granzeier III, President
GranzTronix
https://www.granztronix.com
Helping to Build a Better Engineer

User avatar
jknightandkarr
Member
Member
Posts: 329
Joined: Tue May 12, 2015 5:11 pm
Location: Hopelessly lost on the USS-Titanic 968 years from home....
Contact:

Re: Creating some boards, anyone interested??

Postby jknightandkarr » Wed Nov 24, 2021 10:58 pm

Least it won't blow that easy... :lol:
Image
My website- Http://titaniceng.altervista.org/

My Facebookhttps://www.facebook.com/TitanicElectronicsGames/

~Owner, Designer & Builder Killer K.A.R.R.
~Starfleet Captain Joe R.
USS-Titanic Registry Number NCC-1513
Launched: Star Date 48509.9 Galaxy Class, Titanic Sub-Class Starship Max Warp: 15.96

User avatar
Savage///Circuits
VIP
VIP
Posts: 466
Joined: Tue May 12, 2015 2:43 pm
Location: Palmyra, NY
Contact:

Re: Creating some boards, anyone interested??

Postby Savage///Circuits » Thu Jan 27, 2022 10:41 pm

This looks almost identical to my original Knight Rider Scanning Light Driver Board from 1988, which drove 12V 1156 automotive bulbs and was driven by a small logic board and later, my Z80 ACM. Nostalgic. :ugeek:
Image
I'm only responsible for what I say, not what you understand.

User avatar
jknightandkarr
Member
Member
Posts: 329
Joined: Tue May 12, 2015 5:11 pm
Location: Hopelessly lost on the USS-Titanic 968 years from home....
Contact:

Re: Creating some boards, anyone interested??

Postby jknightandkarr » Fri Jan 28, 2022 7:49 pm

Would work for it! I am going to make my own controller sometime.
Image
My website- Http://titaniceng.altervista.org/

My Facebookhttps://www.facebook.com/TitanicElectronicsGames/

~Owner, Designer & Builder Killer K.A.R.R.
~Starfleet Captain Joe R.
USS-Titanic Registry Number NCC-1513
Launched: Star Date 48509.9 Galaxy Class, Titanic Sub-Class Starship Max Warp: 15.96


Return to “Projects In Progress”

Who is online

Users browsing this forum: No registered users and 1 guest