Especially our visitors from Savage///Circuits and Parallax!!!
Please take a look our new forums, we hope you register and become an active user.
The ZappBots forums are being run on phpBB 3.1.4 software which is different then the vBulletin used on the Savage///Circuits and Parallax forums.
Therefore, things look and work a little different, especially creating posts and uploading images / attachments.
The important thing is we have a place toTalk, Learn and Showcase our projects.
- Posts: 120
- Joined: Wed May 06, 2015 12:31 am
January 14th, 2011, 07:53 PM
Hydra Game System Enclosure, Reset Switch Plunger, Mini Mod
I purchased a Mountain King Hydra Acrylic Enclosure Kit Pro Kit for use with Hydra game system. It is a very nice enclosure kit, with a perfect fit.
I made a mini-mod to the enclosure.
Since I have the add on SD card for the Hydra, it is very important that I can easily activate the reset switch on the Hydra.
I got tired of having to use a paper clip to activate the reset switch on the board.
Therefore, I made a Reset Switch Plunger using a No. 4 x .75" Nylon screw and 3 No. 4 Nylon nuts.
A) Thread the 1st Nut most of the way onto the screw.
B) Place the Screw through the top plate of the of the enclosure (the first 1st nut should be on top of the plate).
C) Now thread the the 2nd Nut onto the screw, (the 2nd nut should be on the bottom side of the top plate).
D) Now place the 3rd Nut onto the bottom of the screw.
E) Adjust the position of the 1st and second nuts so that the plunger assembly can push (activate) the reset button on the Hydra circuit board.
butlh ghajbogh nuv'e' yIHo'.
Admire the person with dirt under his fingernails.
- Posts: 143
- Joined: Tue May 12, 2015 7:03 pm
Users browsing this forum: No registered users and 1 guest