Savage///Circuits Blind Auction Clearing House

[Savage///Circuits]

I used this robot to test scale and drive systems for what eventually became the Stingray Robot. This platform has 4-wheel differential drive with 4 motors. Multiple decks, and lots of spare parts because I have the parts from a second robot as well. This was was fitted with a Super Carrier Board with BS2 (BS2p?) module, 2x16 LCD, Smart GPS module, PING))) sensors on stands and dual NiMH batteries. One for the control circuitry and the other for the motors, which are driven by two built-in HB-25 Motor Controllers. This robot has torque and is fun to watch.

[Savage///Circuits]

This item is no longer available.

[Savage///Circuits]

This was a finalized prototype for the Stingray Robot. All original. A little dusty. Needs a home.

[Savage///Circuits]

This was supposed to be the successor to the Stingray Robot. This robot is actually larger and longer than a Stingray and used motors with encoders on L-Brackets as well as the same caster wheel as the Eddie Robot used. This robot was published in Servo Magazine in two articles, however the wheel kit was discontinued and the caster wheel changed in height so it never became a product. This prototype has three PING))) sensors and other comes as shown.

[Savage///Circuits]

Not just ANY PDB...this is the one used to design the Solder Pot Controller for Parallax. I found this in the bottom of a storage cabinet with the original circuits all intact. Comes with a BS2px24 but not the stuff plugged into the breadboard area.

[Savage///Circuits]

If you're familiar with this board I bet you haven't seen one in a long time! I bought this one before working at Parallax! They've been unavailable since about then. Comes with the BS2P40 Module.

[Savage///Circuits]

This kit was reviewed on the Savage///Circuits website and then some time later Gadget Gangster went dark. If you liked the board, here's one still new in the package.

[Savage///Circuits]

Brand new in the package. I thought these were cool but never ended up doing anything with it. Not sure I ever will now. Time to free it up for someone who will.

[Savage///Circuits]

If your MSR1 for your Stingray failed, perhaps you need a replacement. Only tested for Propeller recognition. Not fully tested.

[Savage///Circuits]

These are older Professional Development Boards and have the older gray color. Two are shown, but you only get one for your winning bid.