Especially our visitors from Savage///Circuits and Parallax!!!
Please take a look our new forums, we hope you register and become an active user.
The ZappBots forums are being run on phpBB 3.1.4 software which is different then the vBulletin used on the Savage///Circuits and Parallax forums.
Therefore, things look and work a little different, especially creating posts and uploading images / attachments.
The important thing is we have a place toTalk, Learn and Showcase our projects.
Please read the Rules & Guidelines post before making any posts on the forums.
Please make your first post a reply to the New Members Introduction post.
- Posts: 95
- Joined: Sat May 23, 2015 9:30 pm
We have a data logger at work and it is missing data. It records temperature and humidity.
I looked at the instructions and the instructions recommend taking the battery out if the device freezes.
We've had to do that twice. I don't know why. The device looks like it is operating and we can't make changes.
We can't look inside the device until it is too late.
Why do electronics freeze? Can you help me explain to my boss why we are missing a week's worth of data?
- Posts: 224
- Joined: Tue May 12, 2015 5:11 pm
- Location: Hopelessly lost on the USS-Titanic 968 years from home....
- Posts: 130
- Joined: Sun May 31, 2015 2:37 pm
- Location: Pittsburgh, PA, USA, Terra, Sol, Andromeda Arm, Milky Way Galaxy, Milky Way Cluster, Local Universe
We really need some more information in order to work on this issue.
- What are the make and model of your data logger?
- Is this a custom/homebrew/DIY/kit data logger, and if so what is the circuit design/specs/schematic/PCB artwork?
- Have there been any modifications/upgrades/repairs done to the inside of the logger?
- Have you opened it up to look for obvious troubles, like cold solder joints, loose connections, burned out components, etc?
- What are you trying to measure, what are the ranges, how often are you recording the measurements?
- Can you identify any conditions which seem to cause the data loss/lock-up (I.E. it always fails after three hours of recording... it fails sometimes when the temperature is below 0 degrees... we have been having power bumps/brownouts/failures/etc, and it fails on those nights...)
- Can you hook up any other test equipment to help determine any of these conditions?
Unfortunately, there are so many ways for any device (electronic or otherwise) to fail, that we cannot make any guesses without this kind of information.
Something else to consider, have you looked into building your own to take the place of this data logger? That might be a viable alternative, especially with the people here. What is it that you are trying to measure and record?
Helping to Build a Better Engineer
Users browsing this forum: No registered users and 4 guests