ZappBots wishes a warm welcome to everyone.

Especially our visitors from
Savage///Circuits and Parallax!!!


Please take a look our new forums, we hope you register and become an active user.

The ZappBots forums are being run on phpBB 3.1.4 software which is different then the vBulletin used on the Savage///Circuits and Parallax forums.
Therefore, things look and work a little different, especially creating posts and uploading images / attachments.


The important thing is we have a place toTalk, Learn and Showcase our projects.

Skyline Silhouette Light

The place for members to showcase their completed projects.
User avatar
JDISME
Member
Member
Posts: 69
Joined: Thu May 21, 2015 1:02 am
Location: Billings, Montana
Contact:

Skyline Silhouette Light

Postby JDISME » Tue Jun 19, 2018 5:33 pm

Image

I wanted to build a skyline silhouette light for a little bit now, and finally got the materials to give it a whirl. From the 406 sign sign I did, I learned a lot about cutting out letters and numbers with a Dremel. I am a big fan of using my Dremel for these types of projects, highly recommended for any hobbyist. I also wanted to move from a single LED color to RGB to create more color options. I went with the popular WS2812B module. I found of them at Spark Fun for minimal costs for 10 and picked them up with some extras RGB LEDs. It turns out the F5-C RGB pin configuration is different, so when the WS2812 would be green, the F5-C's would be a I think it was red. Good to note when using a driver specifically for the WS2812B modules. The LEDs were the only thing in the this project that I have never used before.

Image

I took some hours to create all the colors I could think I wanted to call from a DAT section and got up to 81 different colors that I could easily differentiate from each other. Being that I wasn't used to using the LEDs, I was surprised to see what amazing color they were able to produce and at such a wide range; truly impressive. In the beginning of this project, I was creating longer routines than needed and was helped by the driver developer JonnyMac. His driver initially didn't include a way to transition between set colors, such as red to blue. After a day he released, in my opinion, a great and complete driver for any use of the WS2812. Many thanks to him for that, I felt pretty lucky that I caught it as soon as it came out. It made for easy work between transitions. I was stuck on controlling the RGB color in a format that I am used to but not the best for control. Once I changed over to the single long $FF_FF_FF_00 format, instead of using 4 bytes 255,255,255,0 it was a whole lot easier to manipulate the LEDs. I had some 20 lines of code for each transitions, when it really only took 3. I remember working at Parallax and looking at his code for StampWorks, I was always amazed on how he completed tasks so efficiently, but not the easiest to follow for a beginner.

I needed a light bar for the LEDs to fit inside the enclosure. I cut up a PCB board into smaller pieces to make it. Came together pretty easy, but this isn't the first time I've used a Dremel to create boards from other boards. Once it was smaller boards, I soldered them together to make a bar that stretched roughly the inside length and soldered the WS2812B modules on, 8 in total but ended up using 4 on the bar because it was less power consumption. There could be a timer on the lights, but I opted not to included one to save power.

Image

After I got the LED control down, I focused on the box. I used the Spark Fun box to create a mock setup which worked out perfectly. I was able to program and test each color and what the transitions were going to look like.

After that, it was down to the garage and create it out of pine and plywood. I printed out some stylish titles of Billings that I thought would be a nice fit for the project, and learned a couple new things when cutting out letters this go around. Vibrations are not your friend for thin parts. I broke a couple letters when the letter got to thin. I opted for a more stylist and oddly my first choice in font, BlowBrush; Stencil didn't work out any good. I cut out the letters and painted them black (sorry for the lack of images for this portion, I was more focused on getting them correct than I was documenting). Let them set and put the box together. Painted the box light brown to allow the Billings to be clearly seen during daytime. I had to chisel a portion of the background piece for the PIR sensor, because a router would have rounded the edges and I wanted something form fitting to the sensor. I put a shelf for the light bar to sit on, and to keep the wires and other pieces from casting a shadow. I painted the inside the box light gray. Took a couple days to come up with what I wanted to do for the background piece, before I came up with a cloud idea. Montana is “Big Sky Country” and wanted to represent that with clouds and blue. I am happy that it didn't effect the over-all look with the colors I selected, red, white, blue for obvious reasons.

Once it was assembled I was happy with how the PIR sensor blended (ish) with the clouds and how good it functioned. This is the first of it's kind that I know of, and I have plenty of ideas for other cities and even team themed projects.

YouTube Demo:
https://www.youtube.com/watch?v=7yAw9cnevWQ&t

My Building Blog:
http://jdprojects.ihostfull.com/

Billings Silhouette Box Code.zip
(13.74 KiB) Downloaded 12 times
Last edited by JDISME on Tue Aug 28, 2018 1:25 am, edited 2 times in total.
Joshua Donelson

User avatar
zappman
Administrator
Administrator
Posts: 111
Joined: Wed May 06, 2015 12:31 am
Contact:

Re: Skyline Silhouette Light

Postby zappman » Fri Jun 22, 2018 3:57 am

Hi JD,

I really like your project, thank you for sharing it. I like the way the illumination changes. It reminds me of my childhood visits to the planetarium, they a 360 degree sky line around the bottom edge of the dome, and it lighting changed much like your project.

Thanks,
zappman
Image
butlh ghajbogh nuv'e' yIHo'.
Admire the person with dirt under his fingernails.

User avatar
JDISME
Member
Member
Posts: 69
Joined: Thu May 21, 2015 1:02 am
Location: Billings, Montana
Contact:

Re: Skyline Silhouette Light

Postby JDISME » Thu Jul 05, 2018 12:14 am

Thanks, I remember the planetarium in Boulder when I was a kid that did that as well; cool places to visit.

The WS2812 colors are so vibrant, really surprised. The phase portion in the object made cycling through colors a breeze, I have a feeling I will create another project and use this in more detail, but just wanted to get the concept down. There are plenty of options to make sports teams or product pieces, like Pepsi or Google, and be able to match the actual colors to a good degree. Great modules, highly recommended if you have not picked any up.
Joshua Donelson


Return to “Completed Projects”

Who is online

Users browsing this forum: No registered users and 1 guest